Journal Description
Biosensors
Biosensors
is an international, peer-reviewed, open access journal on the technology and science of biosensors published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, MEDLINE, PMC, Embase, CAPlus / SciFinder, Inspec, and other databases.
- Journal Rank: JCR - Q1 (Chemistry, Analytical) / CiteScore - Q1 (Engineering (miscellaneous))
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 17.4 days after submission; acceptance to publication is undertaken in 2.8 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
5.4 (2022);
5-Year Impact Factor:
5.7 (2022)
Latest Articles
Construction of Metal–Organic Framework as a Novel Platform for Ratiometric Determination of Cyanide
Biosensors 2024, 14(6), 276; https://doi.org/10.3390/bios14060276 (registering DOI) - 27 May 2024
Abstract
Metal–organic frameworks (MOFs) are frequently utilized as sensing materials. Unfortunately, the low conductivity of MOFs hinder their further application in electrochemical determination. To overcome this limitation, a novel modification strategy for MOFs was proposed, establishing an electrochemical determination method for cyanides in Baijiu.
[...] Read more.
Metal–organic frameworks (MOFs) are frequently utilized as sensing materials. Unfortunately, the low conductivity of MOFs hinder their further application in electrochemical determination. To overcome this limitation, a novel modification strategy for MOFs was proposed, establishing an electrochemical determination method for cyanides in Baijiu. Co and Ni were synergistically used as the metal active centers, with meso−Tetra(4−carboxyphenyl)porphine (TCPP) and Ferrocenecarboxylic acid (Fc−COOH) serving as the main ligands, synthesizing Ni/Co−MOF−TCPP−Fc through a hydrothermal method. The prepared MOF exhibited improved conductivity and stable ratio signals, enabling rapid and sensitive determination of cyanides. The screen−printed carbon electrodes (SPCE) were suitable for in situ and real−time determination of cyanide by electrochemical sensors due to their portability, low cost, and ease of mass production. A logarithmic linear response in the range of 0.196~44 ng/mL was demonstrated by this method, and the limit of detection (LOD) was 0.052 ng/mL. Compared with other methods, the sensor was constructed by a one−step synthesis method, which greatly simplifies the analysis process, and the determination time required was only 4 min. During natural cyanide determinations, recommended readouts match well with GC−MS with less than 5.9% relative error. Moreover, this electrochemical sensor presented a promising method for assessing the safety of cyanides in Baijiu.
Full article
(This article belongs to the Special Issue Advanced Nanozyme for Biosensors)
Open AccessArticle
A Novel Fluorescence-Based Microplate Assay for High-Throughput Screening of hSULT1As Inhibitors
by
Xiaoting Niu, Yufan Fan, Liwei Zou and Guangbo Ge
Biosensors 2024, 14(6), 275; https://doi.org/10.3390/bios14060275 - 27 May 2024
Abstract
Human sulfotransferase 1As (hSULT1As) play a crucial role in the metabolic clearance and detoxification of a diverse range of endogenous and exogenous substances, as well as in the bioactivation of some procarcinogens and promutagens. Pharmacological inhibiting hSULT1As activities may enhance the in vivo
[...] Read more.
Human sulfotransferase 1As (hSULT1As) play a crucial role in the metabolic clearance and detoxification of a diverse range of endogenous and exogenous substances, as well as in the bioactivation of some procarcinogens and promutagens. Pharmacological inhibiting hSULT1As activities may enhance the in vivo effects of most hSULT1As drug substrates and offer protective strategies against the hSULT1As-mediated bioactivation of procarcinogens. To date, a fluorescence-based high-throughput assay for the efficient screening of hSULT1As inhibitors has not yet been reported. In this work, a fluorogenic substrate (HN-241) for hSULT1As was developed through scaffold-seeking and structure-guided molecular optimization. Under physiological conditions, HN-241 could be readily sulfated by hSULT1As to form HN-241 sulfate, which emitted brightly fluorescent signals around 450 nm. HN-241 was then used for establishing a novel fluorescence-based microplate assay, which strongly facilitated the high-throughput screening of hSULT1As inhibitors. Following the screening of an in-house natural product library, several polyphenolic compounds were identified with anti-hSULT1As activity, while pectolinarigenin and hinokiflavone were identified as potent inhibitors against three hSULT1A isozymes. Collectively, a novel fluorescence-based microplate assay was developed for the high-throughput screening and characterization of hSULT1As inhibitors, which offered an efficient and facile approach for identifying potent hSULT1As inhibitors from compound libraries.
Full article
(This article belongs to the Special Issue Fluorescent Sensors for Biological Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Fluorogenic Aptamer-Based Hybridization Chain Reaction for Signal-Amplified Imaging of Apurinic/Apyrimidinic Endonuclease 1 in Living Cells
by
Meixi Liu, Yunjie Tan, Chen Zhou, Zhaoming Fu, Ru Huang, Jin Li and Le Li
Biosensors 2024, 14(6), 274; https://doi.org/10.3390/bios14060274 - 27 May 2024
Abstract
A fluorogenic aptamer (FA)-based hybridization chain reaction (HCR) could provide a sensitive and label-free signal amplification method for imaging molecules in living cells. However, existing FA-HCR methods usually face some problems, such as a complicated design and significant background leakage, which greatly limit
[...] Read more.
A fluorogenic aptamer (FA)-based hybridization chain reaction (HCR) could provide a sensitive and label-free signal amplification method for imaging molecules in living cells. However, existing FA-HCR methods usually face some problems, such as a complicated design and significant background leakage, which greatly limit their application. Herein, we developed an FA-centered HCR (FAC-HCR) method based on a remote toehold-mediated strand displacement reaction. Compared to traditional HCRs mediated by four hairpin probes (HPs) and two HPs, the FAC-HCR displayed significantly decreased background leakage and improved sensitivity. Furthermore, the FAC-HCR was used to test a non-nucleic acid target, apurinic/apyrimidinic endonuclease 1 (APE1), an important BER-involved endonuclease. The fluorescence analysis results confirmed that FAC-HCR can reach a detection limit of 0.1174 U/mL. By using the two HPs for FAC-HCR with polyetherimide-based nanoparticles, the activity of APE1 in living cells can be imaged. In summary, this study could provide a new idea to design an FA-based HCR and improve the performance of HCRs in live cell imaging.
Full article
(This article belongs to the Special Issue Fluorescent Materials with Excellent Biocompatibility and Their Application in Bio-Sensing, Bio-Imaging (Volume II))
►▼
Show Figures
Figure 1
Open AccessCommunication
Morphology Control of Zr-Based Luminescent Metal-Organic Frameworks for Aflatoxin B1 Detection
by
Fang Zhu, Qiuxue Chai, Dinghui Xiong, Nuanfei Zhu, Jialong Zhou, Ruoxi Wu and Zhen Zhang
Biosensors 2024, 14(6), 273; https://doi.org/10.3390/bios14060273 - 27 May 2024
Abstract
Metal–organic frameworks (MOFs) have gained significant prominence as sensing materials owing to their unique properties. However, understanding the correlation between the morphology, properties, and sensing performance in these MOF-based sensors remains a challenge, limiting their applications and potential for improvement. In this study,
[...] Read more.
Metal–organic frameworks (MOFs) have gained significant prominence as sensing materials owing to their unique properties. However, understanding the correlation between the morphology, properties, and sensing performance in these MOF-based sensors remains a challenge, limiting their applications and potential for improvement. In this study, Zr-MOF was chosen as an ideal model to explore the impact of the MOF morphology on the sensing performance, given its remarkable stability and structural variability. Three luminescent MOFs (namely rod-like Zr-LMOF, prismoid-like Zr-LMOF, and ellipsoid-like Zr-LMOF) were synthesized by adjusting the quantities of the benzoic acid and the reaction time. More importantly, the sensing performance of these Zr-LMOFs in response to aflatoxin B1 (AFB1) was thoroughly examined. Notably, the ellipsoid-like Zr-LMOF exhibited significantly higher sensitivity compared to other Zr-LMOFs, attributed to its large specific surface area and pore volume. Additionally, an in-depth investigation into the detection mechanism of AFB1 by Zr-LMOFs was conducted. Building upon these insights, a ratiometric fluorescence sensor was developed by coordinating Eu3+ with ellipsoid-like Zr-LMOF, achieving a remarkably lower detection limit of 2.82 nM for AFB1. This study contributes to an improved comprehension of the relationship between the MOF morphology and the sensing characteristics while presenting an effective approach for AFB1 detection.
Full article
(This article belongs to the Special Issue Advanced Nanozyme for Biosensors)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Effects of Raman Labeling Compounds on the Stability and Surface-Enhanced Raman Spectroscopy Performance of Ag Nanoparticle-Embedded Silica Nanoparticles as Tagging Materials
by
Cho-Hee Yang, Hye-Seong Cho, Yoon-Hee Kim, Kwanghee Yoo, Jaehong Lim, Eunil Hahm, Won Yeop Rho, Young Jun Kim and Bong-Hyun Jun
Biosensors 2024, 14(6), 272; https://doi.org/10.3390/bios14060272 - 26 May 2024
Abstract
Surface-enhanced Raman spectroscopy (SERS) tagging using silica(SiO2)@Ag nanoparticles (NPs) is easy to handle and is being studied in various fields, including SERS imaging and immunoassays. This is primarily due to its structural advantages, characterized by high SERS activity. However, the Ag
[...] Read more.
Surface-enhanced Raman spectroscopy (SERS) tagging using silica(SiO2)@Ag nanoparticles (NPs) is easy to handle and is being studied in various fields, including SERS imaging and immunoassays. This is primarily due to its structural advantages, characterized by high SERS activity. However, the Ag NPs introduced onto the SiO2 surface may undergo structural transformation owing to the Ostwald ripening phenomenon under various conditions. As a result, the consistency of the SERS signal decreases, reducing their usability as SERS substrates. Until recently, research has been actively conducted to improve the stability of single Ag NPs. However, research on SiO2@Ag NPs used as a SERS-tagging material is still lacking. In this study, we utilized a Raman labeling compound (RLC) to prevent the structural deformation of SiO2@Ag NPs under various conditions and proposed excellent SiO2@Ag@RLC-Pre NPs as a SERS-tagging material. Using various RLCs, we confirmed that 4-mercaptobenzoic acid (4-MBA) is the RLC that maintains the highest stability for 2 months. These results were also observed for the SiO2@Ag NPs, which were unstable under various pH and temperature conditions. We believe that SERS tags using SiO2@Ag NPs and 4-MBA can be utilized in various applications on based SERS because of the high stability and consistency of the resulting SERS signal.
Full article
(This article belongs to the Special Issue Nanoparticle-Based Biosensors and Their Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Rapid Separation and Detection of Drugs in Complex Biological Matrix Using TD-CDI Mass Spectrometer
by
Wenyan Shi, Zi Ye, Qin Yang, Jianhua Zhou, Jiasi Wang and Xinming Huo
Biosensors 2024, 14(6), 271; https://doi.org/10.3390/bios14060271 - 25 May 2024
Abstract
The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized
[...] Read more.
The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized by its compact and simple design, enables the separation of analytes within seconds and real-time presentation of one or two analyte peaks on the mass spectrum most of the time, which reduces matrix interference and improves detection performance. Through experimental investigation, we studied the characteristics of TD-CDI for analyte separation and detection, even with the same mass number, and optimized the TD-CDI approach. TD-CDI-MS was employed for the rapid detection of drugs in various traditional medicine, food products, and human samples. Additionally, by utilizing TD-CDI for segmented hair direct analysis, it becomes possible to trace the drug usage cycle of individuals. This underscores the feasibility of the proposed analytical method within the realm of drug detection.
Full article
(This article belongs to the Special Issue Recent Advances and Applications of Multiplexed Analysis and Multiplexed Nanobiosensors)
Open AccessArticle
Development of an Aptamer-Based QCM-D Biosensor for the Detection of Thrombin Using Supported Lipid Bilayers as Surface Functionalization
by
Anne Görner, Leyla Franz, Tuba Çanak-Ipek, Meltem Avci-Adali and Anna-Kristina Marel
Biosensors 2024, 14(6), 270; https://doi.org/10.3390/bios14060270 - 25 May 2024
Abstract
Biosensors play an important role in numerous research fields. Quartz crystal microbalances with dissipation monitoring (QCM-Ds) are sensitive devices, and binding events can be observed in real-time. In combination with aptamers, they have great potential for selective and label-free detection of various targets.
[...] Read more.
Biosensors play an important role in numerous research fields. Quartz crystal microbalances with dissipation monitoring (QCM-Ds) are sensitive devices, and binding events can be observed in real-time. In combination with aptamers, they have great potential for selective and label-free detection of various targets. In this study, an alternative surface functionalization for a QCM-D-based aptasensor was developed, which mimics an artificial cell membrane and thus creates a physiologically close environment for the binding of the target to the sensor. Vesicle spreading was used to form a supported lipid bilayer (SLB) of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphethanolamine-N-(cap biotinyl) (biotin-PE). The SLB was then coated with streptavidin followed by applying a biotinylated aptamer against thrombin. SLB formation was investigated in terms of temperature and composition. Temperatures of 25 °C and below led to incomplete SLB formation, whereas a full bilayer was built at higher temperatures. We observed only a small influence of the content of biotinylated lipids in the mixture on the further binding of streptavidin. The functionalization of the sensor surface with the thrombin aptamer and the subsequent thrombin binding were investigated at different concentrations. The sensor could be reconstituted by incubation with a 5 M urea solution, which resulted in the release of the thrombin from the sensor surface. Thereafter, it was possible to rebind thrombin. Thrombin in spiked samples of human serum was successfully detected. The developed system can be easily applied to other target analytes using the desired aptamers.
Full article
(This article belongs to the Special Issue Chemical and Biochemical Sensors/Nanosensors for Medical, Environmental and Security Applications)
►▼
Show Figures
Figure 1
Open AccessReview
Optical Bioassays Based on the Signal Amplification of Redox Cycling
by
Yunxiao Feng, Fengli Gao, Xinyao Yi and Ming La
Biosensors 2024, 14(6), 269; https://doi.org/10.3390/bios14060269 - 24 May 2024
Abstract
Optical bioassays are challenged by the growing requirements of sensitivity and simplicity. Recent developments in the combination of redox cycling with different optical methods for signal amplification have proven to have tremendous potential for improving analytical performances. In this review, we summarized the
[...] Read more.
Optical bioassays are challenged by the growing requirements of sensitivity and simplicity. Recent developments in the combination of redox cycling with different optical methods for signal amplification have proven to have tremendous potential for improving analytical performances. In this review, we summarized the advances in optical bioassays based on the signal amplification of redox cycling, including colorimetry, fluorescence, surface-enhanced Raman scattering, chemiluminescence, and electrochemiluminescence. Furthermore, this review highlighted the general principles to effectively couple redox cycling with optical bioassays, and particular attention was focused on current challenges and future opportunities.
Full article
(This article belongs to the Special Issue Electrochemical and Fluorescent Biosensors: Novel Strategies, Methods, and Materials II)
Open AccessArticle
Development of a Multiplexed Electrochemical Aptasensor for the Detection of Cyanotoxins
by
Amina Rhouati and Mohammed Zourob
Biosensors 2024, 14(6), 268; https://doi.org/10.3390/bios14060268 - 24 May 2024
Abstract
In this study, we report a multiplexed platform for the simultaneous determination of five marine toxins. The proposed biosensor is based on a disposable electrical printed (DEP) microarray composed of eight individually addressable carbon electrodes. The electrodeposition of gold nanoparticles on the carbon
[...] Read more.
In this study, we report a multiplexed platform for the simultaneous determination of five marine toxins. The proposed biosensor is based on a disposable electrical printed (DEP) microarray composed of eight individually addressable carbon electrodes. The electrodeposition of gold nanoparticles on the carbon surface offers high conductivity and enlarges the electroactive area. The immobilization of thiolated aptamers on the AuNP-decorated carbon electrodes provides a stable, well-orientated and organized binary self-assembled monolayer for sensitive and accurate detection. A simple electrochemical multiplexed aptasensor based on AuNPs was designed to synchronously detect multiple cyanotoxins, namely, microcystin-LR (MC-LR), Cylindrospermopsin (CYL), anatoxin-α, saxitoxin and okadaic acid (OA). The choice of the five toxins was based on their widespread presence and toxicity to aquatic ecosystems and humans. Taking advantage of the conformational change of the aptamers upon target binding, cyanotoxin detection was achieved by monitoring the resulting electron transfer increase by square-wave voltammetry. Under the optimal conditions, the linear range of the proposed aptasensor was estimated to be from 0.018 nM to 200 nM for all the toxins, except for MC-LR where detection was possible within the range of 0.073 to 150 nM. Excellent sensitivity was achieved with the limits of detection of 0.0033, 0.0045, 0.0034, 0.0053 and 0.0048 nM for MC-LR, CYL, anatoxin-α, saxitoxin and OA, respectively. Selectivity studies were performed to show the absence of cross-reactivity between the five analytes. Finally, the application of the multiplexed aptasensor to tap water samples revealed very good agreement with the calibration curves obtained in buffer. This simple and accurate multiplexed platform could open the window for the simultaneous detection of multiple pollutants in different matrices.
Full article
(This article belongs to the Special Issue Biosensing for Environmental Monitoring)
Open AccessArticle
Rapid Determination of Cr3+ and Mn2+ in Water Using Laser-Induced Breakdown Spectroscopy Combined with Filter Paper Modified with Gold Nanoclusters
by
Xuan Dai, Changbo Song, Shixiang Ma, Fengjing Cao and Daming Dong
Biosensors 2024, 14(6), 267; https://doi.org/10.3390/bios14060267 - 23 May 2024
Abstract
Excessive emissions of heavy metals not only cause environmental pollution but also pose a direct threat to human health. Therefore, rapid and accurate detection of heavy metals in the environment is of great significance. Herein, we propose a method based on laser-induced breakdown
[...] Read more.
Excessive emissions of heavy metals not only cause environmental pollution but also pose a direct threat to human health. Therefore, rapid and accurate detection of heavy metals in the environment is of great significance. Herein, we propose a method based on laser-induced breakdown spectroscopy (LIBS) combined with filter paper modified with bovine serum albumin-protected gold nanoclusters (LIBS-FP-AuNCs) for the rapid and sensitive detection of Cr3+ and Mn2+. The filter paper modified with AuNCs was used to selectively enrich Cr3+ and Mn2+. Combined with the multi-element detection capability of LIBS, this method achieved the simultaneous rapid detection of Cr3+ and Mn2+. Both elements showed linear ranges for concentrations of 10–1000 μg L−1, with limits of detection of 7.5 and 9.0 μg L−1 for Cr3+ and Mn2+, respectively. This method was successfully applied to the determination of Cr3+ and Mn2+ in real water samples, with satisfactory recoveries ranging from 94.6% to 105.1%. This method has potential application in the analysis of heavy metal pollution.
Full article
(This article belongs to the Section Biosensor and Bioelectronic Devices)
►▼
Show Figures
Figure 1
Open AccessArticle
Optimization of Microfluidics for Point-of-Care Blood Sensing
by
Amirmahdi Tavakolidakhrabadi, Matt Stark, Ulrike Bacher, Myriam Legros and Cedric Bessire
Biosensors 2024, 14(6), 266; https://doi.org/10.3390/bios14060266 - 23 May 2024
Abstract
Blood tests are widely used in modern medicine to diagnose certain illnesses and evaluate the overall health of a patient. To enable testing in resource-limited areas, there has been increasing interest in point-of-care (PoC) testing devices. To process blood samples, liquid mixing with
[...] Read more.
Blood tests are widely used in modern medicine to diagnose certain illnesses and evaluate the overall health of a patient. To enable testing in resource-limited areas, there has been increasing interest in point-of-care (PoC) testing devices. To process blood samples, liquid mixing with active pumps is usually required, making PoC blood testing expensive and bulky. We explored the possibility of processing approximately 2 μL of whole blood for image flow cytometry using capillary structures that allowed test times of a few minutes without active pumps. Capillary pump structures with five different pillar shapes were simulated using Ansys Fluent to determine which resulted in the fastest whole blood uptake. The simulation results showed a strong influence of the capillary pump pillar shape on the chip filling time. Long and thin structures with a high aspect ratio exhibited faster filling times. Microfluidic chips using the simulated pump design with the most efficient blood uptake were fabricated with polydimethylsiloxane (PDMS) and polyethylene oxide (PEO). The chip filling times were tested with 2 μL of both water and whole blood, resulting in uptake times of 24 s for water and 111 s for blood. The simulated blood plasma results deviated from the experimental filling times by about 35% without accounting for any cell-induced effects. By comparing the flow speed induced by different pump pillar geometries, this study offers insights for the design and optimization of passive microfluidic devices for inhomogenous liquids such as whole blood in sensing applications.
Full article
(This article belongs to the Section Biosensors and Healthcare)
►▼
Show Figures
Figure 1
Open AccessReview
Recent Advances in and Application of Fluorescent Microspheres for Multiple Nucleic Acid Detection
by
Zhu Chen, Gaoming Luo, Jie Ren, Qixuan Wang, Xinping Zhao, Linyu Wei, Yue Wang, Yuan Liu, Yan Deng and Song Li
Biosensors 2024, 14(6), 265; https://doi.org/10.3390/bios14060265 - 22 May 2024
Abstract
Traditional single nucleic acid assays can only detect one target while multiple nucleic acid assays can detect multiple targets simultaneously, providing comprehensive and accurate information. Fluorescent microspheres in multiplexed nucleic acid detection offer high sensitivity, specificity, multiplexing, flexibility, and scalability advantages, enabling precise,
[...] Read more.
Traditional single nucleic acid assays can only detect one target while multiple nucleic acid assays can detect multiple targets simultaneously, providing comprehensive and accurate information. Fluorescent microspheres in multiplexed nucleic acid detection offer high sensitivity, specificity, multiplexing, flexibility, and scalability advantages, enabling precise, real-time results and supporting clinical diagnosis and research. However, multiplexed assays face challenges like complexity, costs, and sample handling issues. The review explores the recent advancements and applications of fluorescent microspheres in multiple nucleic acid detection. It discusses the versatility of fluorescent microspheres in various fields, such as disease diagnosis, drug screening, and personalized medicine. The review highlights the possibility of adjusting the performance of fluorescent microspheres by modifying concentrations and carrier forms, allowing for tailored applications. It emphasizes the potential of fluorescent microsphere technology in revolutionizing nucleic acid detection and advancing health, disease treatment, and medical research.
Full article
(This article belongs to the Section Optical and Photonic Biosensors)
Open AccessArticle
Fluorescence Multi-Detection Device Using a Lensless Matrix Addressable microLED Array
by
Victor Moro, Joan Canals, Sergio Moreno, Steffen Bornemann, Oscar Alonso, Andreas Waag, J. Daniel Prades and Angel Dieguez
Biosensors 2024, 14(6), 264; https://doi.org/10.3390/bios14060264 - 22 May 2024
Abstract
A Point-of-Care system for molecular diagnosis (PoC-MD) is described, combining GaN and CMOS chips. The device is a micro-system for fluorescence measurements, capable of analyzing both intensity and lifetime. It consists of a hybrid micro-structure based on a 32 × 32 matrix addressable
[...] Read more.
A Point-of-Care system for molecular diagnosis (PoC-MD) is described, combining GaN and CMOS chips. The device is a micro-system for fluorescence measurements, capable of analyzing both intensity and lifetime. It consists of a hybrid micro-structure based on a 32 × 32 matrix addressable GaN microLED array, with square LEDs of 50 µm edge length and 100 µm pitch, with an underneath wire bonded custom chip integrating their drivers and placed face-to-face to an array of 16x16 single-photon avalanche diodes (SPADs) CMOS. This approach replaces instrumentation based on lasers, bulky optical components, and discrete electronics with a full hybrid micro-system, enabling measurements on 32 × 32 spots. The reported system is suitable for long lifetime (>10 ns) fluorophores with a limit of detection ~1/4 µM. Proof-of-concept measurements of streptavidin conjugate Qdot™ 605 and Amino PEG Qdot™ 705 are demonstrated, along with the device ability to detect both fluorophores in the same measurement.
Full article
(This article belongs to the Special Issue Advanced Fluorescence Biosensors)
Open AccessArticle
A Portable Fluorescent Lateral Flow Immunoassay Platform for Rapid Detection of FluA
by
Xu Chen, Xuhui Huang, Saima Kanwal, Jian Wang, Jing Wen and Dawei Zhang
Biosensors 2024, 14(6), 263; https://doi.org/10.3390/bios14060263 - 21 May 2024
Abstract
The spread of the FluA virus poses significant public health concerns worldwide. Fluorescent lateral flow immunoassay (LFIA) test strips have emerged as vital tools for the early detection and monitoring of influenza infections. However, existing quantitative virus-detection methods, particularly those utilizing smartphone-based sensing
[...] Read more.
The spread of the FluA virus poses significant public health concerns worldwide. Fluorescent lateral flow immunoassay (LFIA) test strips have emerged as vital tools for the early detection and monitoring of influenza infections. However, existing quantitative virus-detection methods, particularly those utilizing smartphone-based sensing platforms, encounter accessibility challenges in resource-limited areas and among the elderly population. Despite their advantages in speed and portability, these platforms often lack user-friendliness for these demographics, impeding their widespread utilization. To address these challenges, this study proposes leveraging the optical pick-up unit (OPU) sourced from commercial optical drives as a readily available fluorescence excitation module for the quantitative detection of antibodies labeled with quantum-dot fluorescent microspheres. Additionally, we utilize miniaturized and high-performance optical components and 3D-printed parts, along with a customized control system, to develop an affordable point-of-care testing (POCT) device. Within the system, a stepping motor scans the test strip from the T-line to the C-line, enabling the calculation of the fluorescence-intensity ratio between the two lines. This simple yet effective design facilitates rapid and straightforward field or at-home testing for FluA. The proposed prototype platform demonstrates promising performance, achieving a limit of detection (LOD) of 2.91 ng/mL, a total detection time of no more than 15 min, and dimensions of 151 mm × 11.2 mm × 10.8 mm3. We believe that the proposed approach holds great potential for improving access to an accurate influenza diagnosis.
Full article
(This article belongs to the Special Issue Emerging Applications of Label-Free Optical Biosensors)
►▼
Show Figures
Figure 1
Open AccessArticle
Utilizing a Disposable Sensor with Polyaniline-Doped Multi-Walled Carbon Nanotubes to Enable Dopamine Detection in Ex Vivo Mouse Brain Tissue Homogenates
by
Thenmozhi Rajarathinam, Sivaguru Jayaraman, Jaeheon Seol, Jaewon Lee and Seung-Cheol Chang
Biosensors 2024, 14(6), 262; https://doi.org/10.3390/bios14060262 - 21 May 2024
Abstract
Disposable sensors are inexpensive, user-friendly sensing tools designed for rapid single-point measurements of a target. Disposable sensors have become more and more essential as diagnostic tools due to the growing demand for quick, easy-to-access, and reliable information related to the target. Dopamine (DA),
[...] Read more.
Disposable sensors are inexpensive, user-friendly sensing tools designed for rapid single-point measurements of a target. Disposable sensors have become more and more essential as diagnostic tools due to the growing demand for quick, easy-to-access, and reliable information related to the target. Dopamine (DA), a prevalent catecholamine neurotransmitter in the human brain, is associated with central nervous system activities and directly promotes neuronal communication. For the sensitive and selective estimation of DA, an enzyme-free amperometric sensor based on polyaniline-doped multi-walled carbon nanotubes (PANI-MWCNTs) drop-coated disposable screen-printed carbon electrodes (SPCEs) was fabricated. This PANI-MWCNTs-2/SPCE sensor boasts exceptional accuracy and sensitivity when working directly with ex vivo mouse brain homogenates. The sensor exhibited a detection limit of 0.05 μM (S/N = 3), and a wide linear range from 1.0 to 200 μM. The sensor’s high selectivity to DA amidst other endogenous interferents was recognized. Since the constructed sensor is enzyme-free yet biocompatible, it exhibited high stability in DA detection using ex vivo mouse brain homogenates extracted from both Parkinson’s disease and control mice models. This research thus presents new insights into understanding DA release dynamics at the tissue level in both of these models.
Full article
(This article belongs to the Special Issue Biosensing Applications for Cell Monitoring)
►▼
Show Figures
Figure 1
Open AccessArticle
Highly Sensitive Detection of Hydrogen Peroxide in Cancer Tissue Based on 3D Reduced Graphene Oxide–MXene–Multi-Walled Carbon Nanotubes Electrode
by
Shuai-Qun Yu, Pan Li, Hao-Jie Li, Ling-Jun Shang, Rui Guo, Xu-Ming Sun and Qiong-Qiong Ren
Biosensors 2024, 14(6), 261; https://doi.org/10.3390/bios14060261 - 21 May 2024
Abstract
Hydrogen peroxide (H2O2) is a signaling molecule that has the capacity to control a variety of biological processes in organisms. Cancer cells release more H2O2 during abnormal tumor growth. There has been a considerable amount of
[...] Read more.
Hydrogen peroxide (H2O2) is a signaling molecule that has the capacity to control a variety of biological processes in organisms. Cancer cells release more H2O2 during abnormal tumor growth. There has been a considerable amount of interest in utilizing H2O2 as a biomarker for the diagnosis of cancer tissue. In this study, an electrochemical sensor for H2O2 was constructed based on 3D reduced graphene oxide (rGO), MXene (Ti3C2), and multi-walled carbon nanotubes (MWCNTs) composite. Three-dimensional (3D) rGO–Ti3C2–MWCNTs sensor showed good linearity for H2O2 in the ranges of 1–60 μM and 60 μM–9.77 mM at a working potential of −0.25 V, with sensitivities of 235.2 µA mM−1 cm−2 and 103.8 µA mM−1 cm−2, respectively, and a detection limit of 0.3 µM (S/N = 3). The sensor exhibited long-term stability, good repeatability, and outstanding immunity to interference. In addition, the modified electrode was employed to detect real-time H2O2 release from cancer cells and cancer tissue ex vivo.
Full article
(This article belongs to the Special Issue Application of Biosensors in Cell or Tissue Analysis)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of a DNA-Based Lateral Flow Strip Membrane Assay for Rapid Screening and Genotyping of Six High-Incidence STD Pathogens
by
Gunho Choi, Keum-Soo Song, Satish Balasaheb Nimse and Taisun Kim
Biosensors 2024, 14(5), 260; https://doi.org/10.3390/bios14050260 - 20 May 2024
Abstract
Sexually transmitted diseases (STDs) are a global concern because approximately 1 million new cases emerge daily. Most STDs are curable, but if left untreated, they can cause severe long-term health implications, including infertility and even death. Therefore, a test enabling rapid and accurate
[...] Read more.
Sexually transmitted diseases (STDs) are a global concern because approximately 1 million new cases emerge daily. Most STDs are curable, but if left untreated, they can cause severe long-term health implications, including infertility and even death. Therefore, a test enabling rapid and accurate screening and genotyping of STD pathogens is highly awaited. Herein, we present the development of the DNA-based 6STD Genotyping 9G Membrane test, a lateral flow strip membrane assay, for the detection and genotyping of six STD pathogens, including Trichomonas vaginalis, Ureaplasma urealyticum, Neisseria gonorrhoeae, Chlamydia trachomatis, Mycoplasma hominis, and Mycoplasma genitalium. Here, we developed a multiplex PCR primer set that allows PCR amplification of genomic materials for these six STD pathogens. We also developed the six ssDNA probes that allow highly efficient detection of the six STD pathogens. The 6STD Genotyping 9G Membrane test lets us obtain the final detection and genotyping results in less than 30 m after PCR at 25 °C. The accuracy of the 6STD Genotyping 9G membrane test in STD genotyping was confirmed by its 100% concordance with the sequencing results of 120 clinical samples. Therefore, the 6STD Genotyping 9G Membrane test emerges as a promising diagnostic tool for precise STD genotyping, facilitating informed decision-making in clinical practice.
Full article
(This article belongs to the Special Issue Biomarker Biosensing: Analysis and Detection)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Parkinson’s Disease Recognition Using Decorrelated Convolutional Neural Networks: Addressing Imbalance and Scanner Bias in rs-fMRI Data
by
Pranita Patil and W. Randolph Ford
Biosensors 2024, 14(5), 259; https://doi.org/10.3390/bios14050259 - 19 May 2024
Abstract
Parkinson’s disease (PD) is a neurodegenerative and progressive disease that impacts the nerve cells in the brain and varies from person to person. The exact cause of PD is still unknown, and the diagnosis of PD does not include a specific objective test
[...] Read more.
Parkinson’s disease (PD) is a neurodegenerative and progressive disease that impacts the nerve cells in the brain and varies from person to person. The exact cause of PD is still unknown, and the diagnosis of PD does not include a specific objective test with certainty. Although deep learning has made great progress in medical neuroimaging analysis, these methods are very susceptible to biases present in neuroimaging datasets. An innovative decorrelated deep learning technique is introduced to mitigate class bias and scanner bias while simultaneously focusing on finding distinguishing characteristics in resting-state functional MRI (rs-fMRI) data, which assists in recognizing PD with good accuracy. The decorrelation function reduces the nonlinear correlation between features and bias in order to learn bias-invariant features. The publicly available Parkinson’s Progression Markers Initiative (PPMI) dataset, referred to as a single-scanner imbalanced dataset in this study, was used to validate our method. The imbalanced dataset problem affects the performance of the deep learning framework by overfitting to the majority class. To resolve this problem, we propose a new decorrelated convolutional neural network (DcCNN) framework by applying decorrelation-based optimization to convolutional neural networks (CNNs). An analysis of evaluation metrics comparisons shows that integrating the decorrelation function boosts the performance of PD recognition by removing class bias. Specifically, our DcCNN models perform significantly better than existing traditional approaches to tackle the imbalance problem. Finally, the same framework can be extended to create scanner-invariant features without significantly impacting the performance of a model. The obtained dataset is a multiscanner dataset, which leads to scanner bias due to the differences in acquisition protocols and scanners. The multiscanner dataset is a combination of two publicly available datasets, namely, PPMI and FTLDNI—the frontotemporal lobar degeneration neuroimaging initiative (NIFD) dataset. The results of t-distributed stochastic neighbor embedding (t-SNE) and scanner classification accuracy of our proposed feature extraction–DcCNN (FE-DcCNN) model validated the effective removal of scanner bias. Our method achieves an average accuracy of 77.80% on a multiscanner dataset for differentiating PD from a healthy control, which is superior to the DcCNN model trained on a single-scanner imbalanced dataset.
Full article
(This article belongs to the Special Issue Biosensing and Imaging for Neurodegenerative Diseases)
►▼
Show Figures
Figure 1
Open AccessArticle
Ti3C2 Nanosheets Functionalized with Ferritin–Biomimetic Platinum Nanoparticles for Electrochemical Biosensors of Nitrite
by
Rongqiu Mu, Danzhu Zhu and Gang Wei
Biosensors 2024, 14(5), 258; https://doi.org/10.3390/bios14050258 - 19 May 2024
Cited by 1
Abstract
Nitrites widely exist in human life and the natural environment, but excessive contents of nitrites will result in adverse effects on the environment and human health; hence, sensitive and stable nitrite detection systems are needed. In this study, we report the synthesis of
[...] Read more.
Nitrites widely exist in human life and the natural environment, but excessive contents of nitrites will result in adverse effects on the environment and human health; hence, sensitive and stable nitrite detection systems are needed. In this study, we report the synthesis of Ti3C2 nanosheets functionalized with apoferritin (ApoF)–biomimetic platinum (Pt) nanoparticle (Pt@ApoF/Ti3C2) composite materials, which were formed by using ApoF as a template and protein-inspired biomineralization. The formed nanohybrid exhibits excellent electrochemical sensing performance towards nitrite (NaNO2). Specifically, the Pt@ApoF catalyzes the conversion of nitrites into nitrates, converting the chemical signal into an electrical signal. The prepared Pt@ApoF/Ti3C2-based electrochemical NaNO2 biosensors demonstrate a wide detection range of 0.001–9 mM with a low detection limit of 0.425 μM. Additionally, the biosensors possess high selectivity and sensitivity while maintaining a relatively stable electrochemical sensing performance within 7 days, enabling the monitoring of NaNO2 in complex environments. The successful preparation of the Pt@ApoF/Ti3C2 nanohybrid materials provides a new approach for constructing efficient electrochemical biosensors, offering a simple and rapid method for detecting NaNO2 in complex environments.
Full article
(This article belongs to the Special Issue Nanomaterial-Based Biosensors to Support the One Health Concept)
►▼
Show Figures
Figure 1
Open AccessArticle
Introducing Triplex Forming Oligonucleotide into Loop-Mediated Isothermal Amplification for Developing a Lateral Flow Biosensor for Streptococci Detection
by
Wei Chang, Po-Hao Chou, Cai-Tong Wu, Jheng-Da Song, Kun-Nan Tsai and Chiuan-Chian Chiou
Biosensors 2024, 14(5), 257; https://doi.org/10.3390/bios14050257 - 17 May 2024
Abstract
Loop-mediated isothermal amplification (LAMP) technology is extensively utilized for the detection of infectious diseases owing to its rapid processing and high sensitivity. Nevertheless, conventional LAMP signaling methods frequently suffer from a lack of sequence specificity. This study integrates a triplex-forming oligonucleotide (TFO) probe
[...] Read more.
Loop-mediated isothermal amplification (LAMP) technology is extensively utilized for the detection of infectious diseases owing to its rapid processing and high sensitivity. Nevertheless, conventional LAMP signaling methods frequently suffer from a lack of sequence specificity. This study integrates a triplex-forming oligonucleotide (TFO) probe into the LAMP process to enhance sequence specificity. This TFO-LAMP technique was applied for the detection of Group B Streptococcus (GBS). The TFO probe is designed to recognize a specific DNA sequence, termed the TFO targeting sequence (TTS), within the amplified product, facilitating detection via fluorescent instrumentation or lateral flow biosensors. A screening method was developed to identify TFO sequences with high affinity to integrate TFO into LAMP, subsequently incorporating a selected TTS into an LAMP primer. In the TFO-LAMP assay, a FAM-labeled TFO is added to target the TTS. This TFO can be captured by an anti-FAM antibody on lateral flow test strips, thus creating a nucleic acid testing biosensor. The efficacy of the TFO-LAMP assay was confirmed through experiments with specimens spiked with varying concentrations of GBS, demonstrating 85% sensitivity at 300 copies and 100% sensitivity at 30,000 copies. In conclusion, this study has successfully developed a TFO-LAMP technology that offers applicability in lateral flow biosensors and potentially other biosensor platforms.
Full article
(This article belongs to the Special Issue Design and Application of Novel Nucleic Acid Probe)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Biosensors Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Biosensors, Sensors
Optical Molecular Sensing and Imaging: Development and Applications
Topic Editors: Pengfei Zhang, Rui WangDeadline: 20 July 2024
Topic in
Automation, Biosensors, Fibers, Photonics, Sensors
Advance and Applications of Fiber Optic Measurement: 2nd Edition
Topic Editors: Flavio Esposito, Stefania Campopiano, Agostino IadiciccoDeadline: 30 November 2024
Conferences
Special Issues
Special Issue in
Biosensors
Implantable, Wireless Biosensors and Biodevices for Neuroscience Research
Guest Editors: Ming Yin, David A. Borton, Jiayi ZhangDeadline: 31 May 2024
Special Issue in
Biosensors
Microfluidic Biosensing Technologies for Point-of-Care Applications
Guest Editors: Muhsincan Sesen, John McGrath, Ameya Vaidya, Pouya RezaiDeadline: 20 June 2024
Special Issue in
Biosensors
Application of Nanomaterials for Biosensors
Guest Editors: Yaoguang Wang, Shakil AwanDeadline: 30 June 2024
Special Issue in
Biosensors
Functional Nanomaterials for Biosensing (Volume II)
Guest Editor: Shao SuDeadline: 20 July 2024
Topical Collections
Topical Collection in
Biosensors
Novel Sensing System for Biomedical Applications
Collection Editors: Chiun-Jye Yuan, Chih-Chia Huang, Chia-Ching Chang
Topical Collection in
Biosensors
Microsystems for Cell Cultures
Collection Editors: Iordania Constantinou, Thomas E. Winkler
Topical Collection in
Biosensors
Biosensors for Point-of-Care Diagnostics
Collection Editor: Guozhen Liu
Topical Collection in
Biosensors
Wearable Biosensors for Healthcare Applications
Collection Editors: Ming-Yih Lee, Wen-Yen Lin